Product characteristics

The chloro-sulfonated polyethylene finish is composed of chloro-sulfonated polyethylene rubber, modified resin, pigment, auxiliary agent and solvent.

Main feature

Excellent chemical stability, resistance to water, acid, alkali, salt and other corrosive media, outdoor type with good weather resistance, light resistance, anti-aging. The film is flexible and can withstand the impact of temperature difference. Simple construction, rapid drying, low temperature and high humidity can also be cured normally.

Use

Chloro-sulfonated polyethylene topcoat is suitable for indoor and outdoor steel structure and concrete structure surface as anti-corrosion decorative coating, especially in the industrial atmosphere environment, can effectively protect the substrate from corrosion.

Construction description

Surface treatment: Keep the primer or intermediate coating surface clean, dry, free of oil and debris.

Mixing ratio: Single component, after opening the packaging bucket, fully stir and use.

Restriction: Prevent water from seeping into the container.

Coating method: Air spraying: Nozzle diameter :2.0~3.0mm

Air pressure :0.3~0.5MPa

Diluent :XC101

Dilution :0~10% (by paint weight)

Rolling brush: Thinner :XC101

Dilution :0~3%(by paint weight)

Airless spraying: Nozzle diameter :0.4~0.5mm

(large area construction) injection pressure :12~15MPa

Diluent :XC101

Dilution :0~5%(by paint weight)

Tool cleaning :XC101

Coating: chloro-sulfonated polyethylene primer or intermediate paint

Shelf life :12 months

Safety measures: Refer to the safety technical instructions in this manual and strictly follow other relevant safety regulations.

Technical parameters