1. Product features:

Imported 828 resin or 128 resin, high quality fillers, solvents, BYK(BYK) additives, American gas company products and other raw materials. Through advanced technology refined, is a high solid content, low viscosity of the two-component material, epoxy coating has a series of excellent characteristics: such as high mechanical wear resistance and adhesion, good chemical resistance, with excellent aesthetic decoration.

2. Instructions for use:

(1) Use:

A surface coating for industrial plants (such as electronics factories, food factories, precision machinery factories), GMP industry plants, laboratories, shopping centers, parking lots, etc.

(2) Construction requirements:

Mixing: During storage, component A may be slightly precipitated, and component A should be thoroughly stirred before mixing; Pour A/B into the mixing bucket proportionally and stir evenly before construction.

Reference dosage: 0.1-0.8kg/m 2(twice)

Construction conditions: Moisture content requirements below 8%, relative humidity below 55%, rainy days or atmospheric relative humidity above 85%, or temperature below 10℃, should avoid construction.

3. Precautions:

Sealed storage: in a cool and ventilated place, moisture-proof, sun protection.

Note:

This product is a chemical and can be harmful or fatal if swallowed. If swallowed, seek medical attention immediately. If accidentally splashed into eyes, rinse with plenty of water. In severe cases, seek medical attention immediately. Pay attention to take preventive measures, fire and explosion prevention, residue disposal should comply with the relevant national or local government safety regulations.

Technical parameter